How to Bleed Brakes like a Pro


As one of the most important aspects of your vehicle, your brakes need special care from time to time, and one of those tasks that comes along every now and then is bleeding the brakes. Along with regularly scheduled maintenance, bleeding your brakes can help increase their performance and longevity.

To teach you how to bleed brakes the right away, the experts at Courtesy Nissan are here to help. Our guide below shows you step-by-step directions on what to do, making it ideal for drivers in the Garland, Addison, Plano, and Richardson areas!

Bleed Your Brakes in 10 Steps

When your brake pedal is feeling a bit squishy, one possible reason is that air has built up in your brake lines. If this is the case, bleeding your brakes can make a huge difference, but first, you’ll have to decide: Do you want to tackle the job yourself, or have it done by a professional at your local dealership? While the latter might be appealing to those with less time on their hands, others might be curious: How do you bleed brakes from home?

To get started on the task, you’ll want to gather a few essential tools first: a brake bleeder wrench (or a combination wrench that fits your nozzle), brake fluid, a glass jar, and a buddy to help. Once you have all that together, you’re good to go!

Now, to remove the air, follow these steps:

1. Find the brake bleeder screw; this should be located behind each of your brakes, and will be easier to spot if you jack up your car.

2. Loosen this screw with a wrench of the correct size. Using a bleeder wrench is generally best, as it will not break the screw.

3. Place a piece of hose over the bleeder screw and connect it to the jar, then fill the jar with brake fluid. If you don’t have a hose, make sure to keep the jar close to the opening to catch any fluid that may come out.

4. Have your buddy slowly pump the brake pedal. Be extra careful if your car is jacked up!

5. Open the bleeder screw to let out any brake fluid. If there’s air present, you should be able to see little bubbles in your jar, though it may be difficult to see if not using a hose.

6. While your friend is pressing down on the brake pedal, tighten the screw back to normal.

7. Repeat steps four through six until no more air bubbles come out.


8. Open your master cylinder and add more brake fluid until you reach the Full line. This step is important, as not doing this can result in the fluid draining out, consequently drawing air back into the lines.

9. Repeat this process on the rest of your brakes until there’s no more air in the lines. Don’t forget to add brake fluid to your master cylinder after each one is complete.

10. Drive around the block to test your brakes. If your pedal is still feeling spongy, repeat these steps until it feels normal.

Skip the Work: Come to Courtesy Nissan

There you have it: a step-by-step guide on how to bleed brakes! If you realize you’re missing some of the tools, or simply decide that you’d rather have the work done by professionals, our authorized service center is happy to take care of it.

Schedule an appointment today, and we’ll fix your brakes in no time without you ever needing to lift a finger. We proudly serve customers in the Garland, Addison, Plano, and Richardson areas, so visit us today!